ABB PST User Manual

Low Voltage Products & Systems 141
ABB Inc. • 888-385-1221 • www.abb-control.com AC 1006.9 - 5/03
Chapter 10 - Functions
10:46 Frequency fault, type of operation
Path in menu:
Menu/SETTINGS/Functional Settings/
Faults/Freq F Op
This parameter makes it possible to select between two different
actions if the frequency is out of range (frequency fault).
10:47 Heatsink over-temperature fault, type of
operation
Path in menu:
Menu/SETTINGS/Functional Settings/
Faults/HS Temp Op
This parameter makes it possible to select between two different
actions if the heat sink temperature of the softstarter is too high.
Stop–M
Stop–A
The motor stops and a manual reset is
required before restart.
The motor stops and an automatic reset
is performed when the fault disappears.
Parameter
text
Default
value
Setting
range
Description
Freq F Op Stop-M
Stop-M,
Stop-A
Type of
operation for
frequency
fault
Stop– M
Stop– A
The motor stops and a manual reset is
required before restart.
The motor stops and an automatic reset
is performed when the fault disappears.
Parameter
text
Default
value
Setting
range
Description
HS Temp Op Stop-M
Stop-M,
Stop-A
Type of
operation for
heat sink
overtempera-
ture fault

ABB PST Specifications

General

Brand	ABB
Model	PST
Category	Controller
Language	English