ABB PST User Manual

82 Low Voltage Products & Systems
AC 1006.9 - 5/03 ABB Inc. • 888-385-1221 • www.abb-control.com
Chapter 7 - Settings and configuration
7:2.4.4 Faults
Phase loss type of operation (Ph Loss Op)
Select what operation should be initiated if a phase loss fault
occurs:
Stop– M The motor will stop and a manual reset is required.
Stop– A The motor will stop and an automatic reset is
performed and the motor will restart.
Press Store to save the selected operation.
Bypass fault type of operation (BP Fault Op)
Select what operation should be initiated if a bypass fault
occurs:
Stop– M The motor will stop and a manual reset is required.
Stop– A The motor will stop and an automatic reset is
performed and the motor will restart
Press Store to save the selected operation.
Fieldbus fault type of operation (FB Fault Op)
Select what operation should be initiated if a fieldbus
communication fault occurs:
Stop– M The motor will stop and a manual reset is required.
Stop– A The motor will stop and an automatic reset is
performed and the motor will restart.
Press Store to save the selected operation.
Figure 27: Faults group
Seq. Start
Settings
Functional settings
Start / Stop
Protections
Warnings
Faults
Inputs
Outputs
Fieldbus

ABB PST Specifications

General

Brand	ABB
Model	PST
Category	Controller
Language	English