54 Low Voltage Products & Systems
AC 1006.9 - 5/03 ABB Inc. • 888-385-1221 • www.abb-control.com
Chapter 6 - Human-Machine Interface (HMI)
6:1.3 Password
To lock the keypad from control and change of settings, a
password can be set. When the keypad is locked, all menus are
available but no changes or actions can be initiated.
6:1.3.1 Setting password
The default password is always 1.
1 Press the upper navigation key once to enter the parameter
Change Password.
2 Select
Change Password
, Figure 11
3 Set the new password (
No or 1...255
) using the navigation
keys.
Select
Store
and
Next
, Figure 12 and Figure 13.
Select
Back
to return to top level.
6:1.3.2 Wrong password
If an incorrect password is entered, the text “Wrong Password”
will be displayed, Figure 14.
A support code will be given, Figure 15. The code can be
ignored and an unlimited number of attempts can be made.
If you are unable to unlock the keypad, note the support code
and contact your local ABB sales office.
Change Password
Select Back
Figure 11: Change password
Figure 12: New password
Figure 13: New password stored
Figure 14: Wrong password
Figure 15: Support code
New Password 1
Store Back
New Password 1
Next
Wrong Password
Next
Support Code 1
Next
To Next Page
Loading...
Need help?
General
