Publication 2711-UM014B-EN-P
10-4 Installing the PV900/1000 Terminals
Clearances
Allow adequate space for mounting, air flow, maintenance, memory
card and legend strip installation.
IMPORTANT
If using a memory card and/or memory card retainer,
allow a back clearance to load the card.
Leave 51 mm (2.0 in)
for Mounting and Air Flow
Leave 51 mm (2.0 in)
for Mounting and Wiring Connections
Leave 51 mm (2.0 in)
for Mounting, Air Flow
and Legend Insert
Leave 51 mm (2.0 in)
for Mounting and Air Flow
Terminal Cutout - Front View
Use full size template
shipped with terminal
Side, Top and Bottom Clearances
6.9 mm
(0.27 in)
90 mm
(3.54 in)
Card
222 mm (8.73 in) is
required to insert and
remove a memory card
with the memory card
retainer.
Back Clearance
Memory Card Retainer
To Next Page
Loading...
Need help?
General
