Publication 2711-UM014B-EN-P
4-8 Using a Memory Card
Storing Font Files
on a Memory Card
Memory cards also store font files for languages used by PanelView
applications. The font file contains the character set for the language.
The memory card containing the font file must be inserted in the
PanelView terminal while the application is running. The terminal
uses the font file to display characters on the application screen.
To view the name of the font file used by an application, select
Terminal Info from the Configuration Mode menu.
Because the memory card must remain in the terminal while the
application is running, it is recommended that you use the Memory
Card Retainer (Cat. No. 2711-NMCC, -NMCD, -NMCE) to secure the
card in the card slot. The retainer ensures the card is not accidentally
removed or dislodged during terminal operation.
Removing a Memory Card
Follow the procedure below to remove a memory card from the
PanelView terminal. Failure to follow this procedure may result in
damage to the card.
1. Select Memory Card from the Configuration Mode menu.
2. Press the Disconnect Card button. This ensures that all files are
closed on the card.
A message prompts you to remove the card from the slot. You
can continue or abort the operation.
3. Press the Continue button.
4. Remove the memory card from the card slot.
On PV1400 terminals, press the Memory Card Eject button.
To Next Page
Loading...
Need help?
General
