Maintenance, 10h
4812160001_A.pdf2014-08-25
Coolant level - Check
Fig. Expansion tank
1. Filler cap
2. Sight glass
1
2
Place the roller on a flat surface and check the level of
the coolant in the sight glass (2). Top up with coolant if
the level is too low.
Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles.
Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles.
Fill with a mixture of 50% water and 50% anti freeze.
See the lubrication specifications in these instructions
and in the engine manual.
Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed.
Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed.
Diesel engine Check oil level
Fig. Engine compartment
1. Dipstick
1
Take care not to touch any hot parts of the engine
or the radiator when removing the dipstick. Risk
for burns.
Take care not to touch any hot parts of the engine
or the radiator when removing the dipstick. Risk
for burns.
The dipstick is located beside the engine's oil and fuel
filter.
Pull up the dipstick (1) and check that the oil level is
between the upper and lower marks. For further
details, refer to the engine's instruction manual.
97
To Next Page
Loading...
Need help?
General
