Atlas Copco CA2500 User Manual

Maintenance - 2000h
4812160001_A.pdf2014-08-25
Diesel engine - Oil and Filter change
Fig. Tractor frame
1. Drain plug
1
The oil drain plug (1) can be accessed most easily
from the right rear underside of the tractor frame, and
is installed with a hose in the engine.
Drain the oil when the engine is warm. Place a
receptacle that holds 19 liters (5 gal) under the drain
plug.
Replace the engine oil filter (2) at the same time. Refer
to the engine manual.
Fig. Engine compartment
2. Oil filter
2
Take great care when draining warm fluid and oil.
Wear protective gloves and goggles.
Take great care when draining warm fluid and oil.
Wear protective gloves and goggles.
Hand in the drained oil and filter to an
environment-friendly waste disposal station.
Hand in the drained oil and filter to an
environment-friendly waste disposal station.
Hood, hinges - Lubrication
Fig. Hood
1. Hinge
1
Lubricate engine hood hinges (1) and the slide rails of
the operator's seat with grease, other joints and
controls with oil. Lubricate the cab hinges with grease.
See the lubrication specification.
139

Atlas Copco CA2500 Specifications

General

Brand	Atlas Copco
Model	CA2500
Category	Power Roller
Language	English