Canon imagePROGRAF iPF6300S Basic Guide No.3 User Manual

Cause Corrective Action
The Printhead is not being aligned
correctly.
In the Control Panel menu, use a lower Head Height setting.
(See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).")
→P.831
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") →P.784
(See "Loading Sheets in the Feed Slot.") →P.809
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Depending on the type of paper,
printed lines may be noticeably
misaligned.
Specify Proof in Print Priority in the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Print-
ing.") →P.64
Borderless printing is not possible
Cause Corrective Action
When executing borderless printing on A1 (594
mm) or A2 (420 mm) rolls, the Spacer for Border-
less Printing was not attached to the Roll Holder.
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls,
attach the included Spacer for Borderless Printing to the Roll
Holder.
(See "Loading Rolls on the Roll Holder.") →P.781
Problems with the printing quality caused by the type of paper
For paper-specific troubleshooting tips to improve the printing quality, refer to the Paper Reference Guide. (See "Types of
Paper.") →P.773
Troubleshooting
> Problems with the printing quality >
Borderless printing is not possible iPF6300S
12
1038

Canon imagePROGRAF iPF6300S Basic Guide No.3 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.3
Category	Printer
Language	English