Canon imagePROGRAF iPF6300S Basic Guide No.3 User Manual

Other Messages
GARO Wxxxx (x represents a number) ......................................................................................................... 1074
ERROR Exxx-xxxx (x represents a letter or number) .................................................................................... 1074
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ................................................................. 1074
Prepare for parts replacement. ...................................................................................................................... 1075
Parts replacement time has passed. ............................................................................................................. 1075
Unknown file. ................................................................................................................................................ 1075
Calibration There is a problem with the multi-sensor. .................................................................................. 1075
Multi-sensor error .......................................................................................................................................... 1076
GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job.
The paper was not advanced because the trailing edge is ta-
ped to the roll.
Turn off the printer and remove the roll from the printer
before restoring power.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Error Message > Other Messages >
GARO Wxxxx (x represents a number) iPF6300S
13
1074

Canon imagePROGRAF iPF6300S Basic Guide No.3 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.3
Category	Printer
Language	English