Canon imagePROGRAF iPF6300S Basic Guide No.3 User Manual

Paper loaded askew.
Cause Corrective Action
Paper loaded crooked was detected when the paper was advanced. Follow these steps to reload the roll.
1. Press the OK button.
2. Adjust the right edge of the roll to make it par-
allel to the orange Paper Alignment Line.
(See "Loading Rolls in the Printer.") →P.784
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.
(See "Loading Rolls on the Roll Holder.")
→P.781
Follow these steps to reload a sheet.
1. Press the OK button.
2. Pull out the sheet.
3. Load the sheet. see "Loading Sheets in the
Feed Slot."
→P.809
Important
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or
Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing prob-
lems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the
back of the next document when it is printed.
Paper not aligned with right guide.
Cause Corrective Action
When paper was loaded, it was not aligned with the guide
on the right side.
Follow these steps to reload the sheet.
1. Press the OK button to clear the error.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.") →P.809
Cannot detect papr
Cause
Corrective Action
The printer could not detect the paper. Reload the paper as follows.
1. Remove the paper and press the OK button.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.") →P.809
(See "Loading Rolls in the Printer.") →P.784
Error Message > Messages regarding paper >
Paper loaded askew. iPF6300S
13
1058

Canon imagePROGRAF iPF6300S Basic Guide No.3 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.3
Category	Printer
Language	English