Starting Preview
Follow the procedure below to start the Preview.
1. Start the apllication software which you use.
2. From the application software's File menu, select the printer setup menu to open the Print dialog box.
Note
• Normally, select Print from the File menu.
3. On the Main sheet, click on the Open Preview When Print Job Starts check box.
Click the OK button to save the settings.
Note
• Your printer is depicted in the lower-left area of this screen.
4. On the Print dialog box in the apllication software, click the Print button.
Windows Software
>
Preview
>
iPF6300S Starting Preview
3
249
To Next Page
Loading...
Need help?
General