8. In the A Page Size list, click the size of the original as specified in the application. In this case, click ISO A4 or
Letter (8.5"x11").
9. Select and click a roll paper in the L Paper Source list.
10. Select the B Borderless Printing check box to display the Information dialog box.
11. Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12. Click OK to close the Information dialog box.
13. In C Borderless Printing Method, make sure E Scale to fit Roll Paper Width is selected.
14. Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Windows) →P.207 "
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll Holder.
(See "Loading Rolls on the Roll Holder →P.781 ")
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
• Document: Any type
• Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Enhanced Printing Options
>
Borderless Printing
>
iPF6300S Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
2
117
To Next Page
Loading...
Need help?
General