Adjust the Colors by Color Matching
When you print a color image imported from a scanner or a digital camera, the image may appear different from the image
on the screen. That is due to the differences in color on the screen and in the printer. In Print Plug-In, you can get the color
balance of the print product closer to the color balance displayed on the screen through performing ICC (International Color
Consortium) color profile settings, matching method settings, and settings for the internal profile, which performs optimum
color conversion in response to media and resolution settings.
1. Display the Main sheet.
2. Select the profile in Output Profile.
Note
• When you place a checkmark in Perform Proof in Preview, you can check the color matching in the
preview. This may not be displayed depending on how you set Media Type.
• The details of Output Profile you have set is saved even when you close the Print Plug-In, but when
the specified profile cannot be located it is set to Auto (Color).
• If an ICC profile is selected as the Output Profile, Adobe CMM can be selected as the color conver-
sion engine. Refer to Using Adobe CMM →P.348 for details.
3. Select the profile matching method in Matching Method.
4. Click the Print button.
Printing begins with the output profile and matching method that you have set.
Windows Software
>
Print Plug-In for Photoshop/Digital Photo Professional
>
iPF6300S Adjust the Colors by Color Matching
3
345
To Next Page
Loading...
Need help?
General