113
You can protect important images so that they cannot be erased by the
camera (pp. 28, 115).
Choose :.
● Press the m button to choose : in the
FUNC. menu, then press the m button
again.
X Once set, will appear on the screen.
● To unlock an image, choose : from the
FUNC. menu and press the m button.
Select Range
Choose [Protect].
● Press the n button, choose the 1
tab and [Protect], and then press the m
button.
Choose [Select Range].
● Press the op buttons to choose [Select
Range] and press the m button.
● Pressing the n button will restore the
menu screen.
If you format the memory card (p. 52), protected images will also be
erased.
• Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection first.
• You can also protect images using the following method. Press the
n button, choose the 1 tab, then choose [Protect]. Press the m
button to choose [Select] and press the m button again, then press the
qr buttons to choose an image and press the m button.
EC277_CUG-E_CDP-E078.book Page 113 Thursday, May 21, 2009 8:16 PM
To Next Page
Loading...
Need help?
General
