88
You can automatically correct red-eye that occurs in images taken with the
flash.
Choose [Flash Settings].
● Press the n button, choose [Flash
Settings] from the 4 tab and press the
m button.
Adjust the setting.
● Press the op buttons to choose [Red-
Eye Corr.] and press the qr buttons to
choose [On].
X Πwill appear on the screen.
Red-eye correction may be applied to red areas other than red eyes. For
example, when red make-up has been used around eyes.
• You can correct recorded images (p. 125).
• If you press the r button as shown on the screen in Step 2 and then
press the n button, the Flash Settings screen will appear.
EC277_CUG-E_CDP-E078.book Page 88 Thursday, May 21, 2009 8:16 PM
To Next Page
Loading...
Need help?
General
