Setting the Date and Time
20
Changing the Date and Time
You can change the current date and time settings.
Display the menus.
● Press the n button.
Choose [Date/Time] in the 3 tab.
● Press the qr buttons to choose the 3
tab.
● Press the op buttons to choose [Date/
Time], then press the m button.
Change the date and time.
● Follow Steps 2 and 3 on p. 19 to adjust
the setting.
● To close the menus, press the n
button.
• The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained for about three weeks after the battery pack
has been removed.
• By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 40) the date/time battery can be charged in about 4 hours even if the camera
is not turned on.
• If the date/time battery is depleted, the Date/Time menu will appear when you
turn the camera on. Follow the steps on p. 19 to set the date and time.
Date/Time battery
EC277_CUG-E_CDP-E078.book Page 20 Thursday, May 21, 2009 8:16 PM
To Next Page
Loading...
Need help?
General
