99
The following functions can be used in the same way as for still images. For
> and z modes, the functions with an * attached can be used in the same
way as for still images.
• Zooming in More Closely on Subjects (Digital Zoom) (p. 60)
You can use the digital zoom, but the optical zoom cannot be used.
If you want to shoot at the maximum zoom factor, you should adjust the optical
zoom to the maximum before shooting.
The sound of the zoom will be recorded.
• Using the Self-Timer (p. 63)*
• Shooting Close-ups (Macro) (p. 67)*
• Shooting Far Away Subjects (Infinity) (p. 68)*
• Adjusting the White Balance (p. 72)
• Changing the Tone of an Image (My Colors) (p. 74)
• Shooting Using the Two Second Self-Timer (p. 75)*
• Shooting Using a TV Monitor (p. 77)*
• Shooting with the AF Lock (p. 82)
• Turning off the AF Assist Beam (p. 136)*
• Displaying the Overlay (p. 138)*
[3:2 Guide] is not available.
• Changing the IS-Mode Settings (p. 138)*
You can switch between [Continuous] and [Off].
EC277_CUG-E_CDP-E078.book Page 99 Thursday, May 21, 2009 8:16 PM
To Next Page
Loading...
Need help?
General
