91
You can change the look of an image when shooting. However, the shooting
conditions may cause the image to become coarse, or the colors may not
come out as expected.
T Color Accent
You can choose to retain a single color and change the rest to black and
white in a composition.
Choose T.
● Follow Steps 1 – 2 on p. 56 to choose T.
Press the l button.
● The unchanged image and the Color
Accent image will both display.
● The color for default settings is green.
Specify the color.
● Position the center frame so it is filled with
the color you want and press the q button.
X The specified color will be recorded.
Specify the range of colors.
●
Press the
op
buttons to change the range
of colors to be retained.
● Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar
colors.
● Pressing the l button accepts the
setting and restores the shooting screen.
Changing the Color and Shooting
Using the flash may cause unexpected results in this mode.
EC277_CUG-E_CDP-E078.book Page 91 Thursday, May 21, 2009 8:16 PM
To Next Page
Loading...
Need help?
General
