62
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 19).
Choose [Date Stamp].
● Press the n button.
● Press the qr buttons to choose 4 tab,
and press the op buttons to choose
[Date Stamp].
Accept the setting.
● Press the qr buttons to choose [Date] or
[Date & Time].
● Press the n button again to accept
the setting.
X [DATE] will appear on the screen.
Shoot.
X The shooting date and time will be
recorded in the image's lower right corner.
● To restore to the original setting, choose
[Off] in Step 2.
• Use the DPOF print settings (p. 128) to print.
• Use the included software to print.
Refer to the
Software Guide for details.
• Connect the camera to a printer to print.
Refer to the Personal Printing Guide for details.
Inserting the Date and Time
Inserting and printing the date and time in images without
an embedded date and time
EC277_CUG-E_CDP-E078.book Page 62 Thursday, May 21, 2009 8:16 PM
To Next Page
Loading...
Need help?
General
