125
You can automatically correct red eyes in images and save them as new
files.
Choose [Red-Eye Correction].
● Press the n button, choose the 1
tab and [Red-Eye Correction], then press
the m button.
X The [Red-Eye Correction] screen will
appear.
Choose an image.
● Press the qr buttons to choose an
image.
Correct the image.
● Press the m button.
X Red-eye detected by the camera will be
corrected and a frame will appear around
the corrected portion.
● You can zoom the image using the
procedures in “Magnifying Images”
(p. 110).
Save as a new image and display.
● Press the opqr buttons to choose
[New File], and press the m button.
X The image will be saved as a new file.
● Perform Step 5 on p. 121.
Correcting the Red-Eye Effect
• Some images may not be properly corrected.
• When [Overwrite] in Step 4 is chosen, the uncorrected image is
overwritten with the corrected data, erasing the original image.
• Protected images cannot be overwritten.
EC277_CUG-E_CDP-E078.book Page 125 Thursday, May 21, 2009 8:16 PM
To Next Page
Loading...
Need help?
General
