66
You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
Set the mode switch to 4 (p. 42).
Choose G.
● Choose G in Step 2 on p. 56 and press
the m button.
Adjust the settings according to
your purposes (pp. 67 – 76).
Shoot.
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in orange. Try the following
settings to obtain the correct exposure.
• Turn on the flash (p. 67)
• Choose a higher ISO speed (p. 71)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Choose the exposure compensation.
● Press the o button.
Adjust the brightness.
● While watching the screen, press qr
buttons to adjust the brightness and press
the o button.
What if the shutter speed and aperture value are displayed
in orange?
Adjusting the Brightness
(Exposure Compensation)
EC277_CUG-E_CDP-E078.book Page 66 Thursday, May 21, 2009 8:16 PM
To Next Page
Loading...
Need help?
General
