139
You can adjust the settings in the 1 tab by pressing the 1 button (p. 48).
Choosing the Image that First Displays
in Playback
● Choose [Resume], then press the qr buttons
to choose an option.
In the 3 tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds.
Change Sounds
● Choose [Sound Options], then press the m
button.
● Press the op buttons to choose an option.
● Press the qr buttons to choose a setting.
Changing the Start-up Screen
● Choose [Start-up Image], then press the m
button.
● Press the qr buttons to choose a setting.
Changing Playback Functions
Last seen Resumes with the image last viewed.
Last shot
Resumes with the most recently shot
image.
Changing the Start-up Image or Sound
1 Preset sounds.
2
You can register your sounds using the supplied
software (p. 140).
No start-up image.
1 Preset images.
2 You can register your images.
EC277_CUG-E_CDP-E078.book Page 139 Thursday, May 21, 2009 8:16 PM
To Next Page
Loading...
Need help?
General
