Dahua N82B3P User Manual

User's Manual
85
Parameter
Description
RTSP Port
Enter the RTSP port number. The default value is 554.
HTTP Port
Enter the HTTP port number. The default value is 80.
TCP Port
The default value is 37777. You can enter the value as needed.
Username
Enter the username of the remote device.
Password
Enter the password of the user for the remote device.
Total Channels
Click Connect to get the total number of channels of the
remote device.
Remote CH No.
Enter the remote channel number of the remote device.
Decode Strategy
Select Default, Realtime, or Fluent.
Protocol Type
●
If the remote device is added through private protocol,
the default type is TCP.
●
If the remote device is added through ONVIF protocol,
the system supports Auto, TCP, UDP, or MULTICAST.
●
If the remote device is added through other
manufacturers, the system supports TCP and UDP.
Encryption
If the remote device is added through ONVIF protocol, select
the Encrypt checkbox and then the system will provide
encryption protection to the data being transmitted.
To use this function, make sure that the HTTPS function is
enabled for the remote IP camera.
Step 5 Click OK.
5.7.2.3 Importing Cameras
Background Information
You can import remote devices in batches.
We recommend this method when you want to add lots of remote devices whose IP
addresses, usernames and passwords are not the same.
Procedure
Step 1 Select Main Menu > CAMERA > Camera List > Camera List.
Step 2 Export the template.
The exported template includes the information of the added remote device. Pay
attention to your data security.
1) Click Export.

Dahua N82B3P Specifications

General

Brand	Dahua
Model	N82B3P
Category	Network Hardware
Language	English