User's Manual
IV
Important Safeguards and Warnings
This section introduces content covering the proper handling of the Device, hazard
prevention, and prevention of property damage. Read carefully before using the Device, and
comply with the guidelines when using it.
Transportation Requirements
Transport the Device under allowed humidity and temperature conditions.
Storage Requirements
Store the Device under allowed humidity and temperature conditions.
Operation Requirements
●
Do not place the Device in a place exposed to sunlight or near heat sources.
●
Keep the Device away from dampness, dust, and soot.
●
Install the Device on a stable surface to prevent it from falling.
●
Do not drop or splash liquid onto the Device, and make sure that there is no object filled
with liquid on the Device to prevent liquid from flowing into it.
●
Put the Device in a well-ventilated place, and do not block its ventilation.
●
Operate the Device within the rated range of power input and output.
●
Do not disassemble the Device.
●
Use the Device under allowed humidity and temperature conditions.
Installation Requirements
●
Do not connect the power adapter to the device while the adapter is powered on.
●
Strictly comply with the local electric safety code and standards. Make sure the ambient
voltage is stable and meets the power supply requirements of the device.
●
Do not expose the battery to environments with extremely low air pressure, or extremely
high or low temperatures. Also, it is strictly prohibited to throw the battery into a fire or
furnace, and to cut or put mechanical pressure on the battery. This is to avoid the risk of
fire and explosion.
●
Use the standard power adapter or cabinet power supply. We will assume no
responsibility for any injuries or damages caused by the use of a nonstandard power
adapter.
To Next Page
Loading...
Need help?
General
