User's Manual
297
●
Click the drop-down list of the state; you can enable/disable holiday date.
●
Click to change the holiday information. Click to delete current date.
Step 5 Click Next to save settings.
5.15.2 Serial Port
Background Information
After setting RS-232 parameters, the NVR can use the COM port to connect to other device
to debug and operate.
Procedure
Step 1 Select MAnalytics+N MENU > SYSTEM > Serial Port.
Figure 5-258 Serial port
Step 2 Configure parameters.
To Next Page
Loading...
Need help?
General
