Enable the NTP function to sync the Device time with the NTP
server.
If NTP is enabled, device time will be automatically
synchronized with server.
In the Server Address box, enter the IP address or domain
name of the corresponding NTP server.
Click Manual Update, the Device starts syncing with the server
immediately.
The system supports TCP protocol only and the default setting
is 123.
In the Interval box, enter the amount of time that you want the
Device to sync time with the NTP server. The value ranges from
0 to 65535.
Step 3 Click Next to save settings.
5.15.1.3 Holiday
Background Information
Here you can add, edit, and delete holiday. After you successfully set holiday information,
you can view holiday item on the record and snapshot period.
You can also configure holiday settings by selecting Main Menu > SYSTEM > General >
Holiday.
Procedure
Step 1 Click Next.
To Next Page
Loading...
Need help?
General
