Dahua N82B3P User Manual

User's Manual
168
5.9.7.2.3 Violence Detection
When the target in the detection region has large body movements such as smashing and
fighting, an alarm will be triggered.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > Stereo Analysis.
Step 2 Select a channel and then click Add.
Step 3 Select Enable and then set Type to Violence Detection.
Step 4 Draw detection rule.
1) Click , and then draw a detection area on the video image. Right-click the
image to stop drawing.
2) Configure parameters.
Table 5-38 Parameters of violence detection
Parameter
Description
Name
Customize the rule name.
Sensitivity
Set alarm sensitivity.
3) Click OK.
Step 5 Configure alarm schedule and linkage.
Figure 5-135 Schedule and alarm linkage
1) Click .
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.

Dahua N82B3P Specifications

General

Brand	Dahua
Model	N82B3P
Category	Network Hardware
Language	English