User's Manual
31
5 Local Operations
The following figures are for reference only. Slight difference might be found on the actual
interface.
5.1 Initialization
Background Information
●
For first-time use, set a login password for the admin account (default user).
●
We recommend setting password protection so that you can reset password in case you
forgot.
●
For your device safety, keep your login password well, and change the password
regularly.
●
The IP address of the Device is 192.168.1.108 by default.
Procedure
Step 1 Start the NVR.
Step 2 Set region, time zone, and time according to the actual situation, and then click
Next.
Click to shut down the device. The system integrator or the user can shut down
the Device directly after setting the time zone.
Step 3 Set the login password for the admin account and then click Next.
To Next Page
Loading...
Need help?
General
