User's Manual
222
5.11.2 Routing Table
Background Information
You can configure the routing table so that the system can automatically calculate the best
path for data transmission.
Procedure
Step 1 Select Main Menu > NETWORK > TCP/IP > Routing Table.
Figure 5-181 Routing table
Step 2 Add the routing table.
●
Auto add.
When you add a camera to the NVR and the IP address of the camera is not on
the existing routing table, the system will add the routing information.
●
Manual add.
Configure the parameters such as destination address, netmask, and gateway,
and then click Add.
◇
The destination address and netmask must not be on the same LAN.
◇
The netmask must be valid and on the same LAN with the NIC card.
◇
You can configure up to eight pieces of routing information.
Step 3 Click Apply.
5.11.3 Port
Background Information
You can configure the maximum connection for accessing the Device from web, platform,
mobile phone or other clients at the same time, and configure each port number.
To Next Page
Loading...
Need help?
General
