Enter the standby time for the Device. The Device automatically
logs out when it is not working in the configured period. You
need to login the Device again.
The value ranges from 0 to 60. 0 indicates there is not standby
time for the Device.
Click Monitor Channel(s) when logout. You can select the
channels that you want to continue monitoring when you
logged out.
Syncs the Device time with IP camera.
Enter the interval for time sync.
You can set auto logout interval once login user remains inactive
for a specified time. Value ranges from 0 to 60 minutes.
Enable the navigation bar. When you click on the live view
screen, the navigation bar is displayed.
Adjust the speed of double-click by moving the slider.
The bigger the value is, the faster the speed is.
Step 3 Click Apply button to save settings.
5.15.1.2 Date and Time
Background Information
You can set device time. You can enable NTP (Network Time Protocol) function so that the
device can sync time with the NTP server.
You can also configure date and time settings by selecting Main Menu > SYSTEM > General >
Date&Time.
Procedure
Step 1 Click Date&Time tab.
To Next Page
Loading...
Need help?
General
