User's Manual
340
7 Glossary
●
DHCP: DHCP (Dynamic Host Configuration Protocol) is one of the TCP/IP protocol cluster.
It is mainly used to assign temporary IP addresses to computers on a network.
●
DDNS: DDNS (Dynamic Domain Name Server) is a service that maps Internet domain
names to IP addresses. This service is useful to anyone who wants to operate a server
(web server, mail server, ftp server and more.) connected to the internet with a dynamic
IP or to someone who wants to connect to an office computer or server from a remote
location with software.
●
eSATA: eSATA (External Serial AT) is an interface that provides fast data transfer for
external storage devices. It is the extension specifications of a SATA interface.
●
GPS: GPS (Global Positioning System) is a satellite system, protected by the US, safely
orbiting thousands of kilometers above the earth.
●
PPPoE: PPPoE (Point to Point Protocol over Ethernet) is a specification for connecting
multiple computer users on an Ethernet local area network to a remote site. Now the
popular mode is ADSL and it adopts PPPoE protocol.
●
Wi-Fi: Wi-Fi is the name of a popular wireless networking technology that uses radio
waves to provide wireless high-speed Internet and network connections. The standard is
for wireless local area networks (WLANs). It is like a common language that all the
devices use to communicate to each other. It is actually IEEE802.11, a family of standard
The IEEE (Institute of Electrical and Electronics Engineers Inc.)
●
3G: 3G is the wireless network standard. It is called 3G because it is the third generation
of cellular telecom standards. 3G is a faster network for phone and data transmission and
speed Is over several hundred kbps. Now there are four standards: CDMA2000, WCDMA,
TD-SCDMA and WiMAX.
●
Dual-stream: The dual-stream technology adopts high-rate bit stream for local HD
storage such as QCIF/CIF/2CIF/DCIF/4CIF encode and one low-rate bit stream for network
transmission such as QCIF/CIF encode. It can balance the local storage and remote
network transmission. The dual-stream can meet the difference band width requirements
of the local transmission and the remote transmission. In this way, the local transmission
using high-bit stream can achieve HD storage and the network transmission adopting
low bit stream suitable for the fluency requirements of the 3G network such as WCDMA,
EVDO, TD-SCDMA.
●
On-off value: It is the non-consecutive signal sampling and output. It includes remote
sampling and remote output. It has two statuses: 1/0.
To Next Page
Loading...
Need help?
General
