User's Manual
148
Figure 5-116 Schedule and alarm linkage
1) Click .
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click Apply.
Step 7 Select Enable checkbox and then click Apply.
5.9.6.2.4 Fast Moving
Background Information
You can detect the fast moving object in the specified zone.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > IVS.
To Next Page
Loading...
Need help?
General
