The settings on port mapping list correspond to the UPnP port mapping
list on the router.
●
Service Name: Name of network server.
●
Protocol: Type of protocol.
●
Internal Port: Internal port that is mapped on the Device.
●
External Port: External port that is mapped on the router.
●
To avoid the conflict, when setting the external port, try to use the
ports from 1024 through 5000 and avoid popular ports from 1
through 255 and system ports from 256 through 1023.
●
When there are several devices on the LAN, properly arrange the
ports mapping relations to avoid mapping to the same external port.
●
When establishing a mapping relationship, ensure the mapping ports
are not occupied or limited.
●
The internal and external ports of TCP and UDP must be the same
and cannot be modified.
●
Click to modify the external port.
Step 3 Click Apply to complete the settings.
In the browser, enter http://WAN IP: External IP port. You can visit the Device on
the LAN.
5.11.12 Email
Background Information
You can configure the email settings to enable the system to send the email as a notification
when an alarm event occurs.
Procedure
Step 1 Select Main Menu > NETWORK > Email.
To Next Page
Loading...
Need help?
General
