After enabling this function, the NVR can be found by other
devices through searching.
Private Protocol
Authentication Mode
●
Security Mode (Recommended): Uses Digest access
authentication when connecting to NVR.
●
Compatible Mode: Select this mode when the client does
not support Digest access authentication.
Enable the LLDP service.
The Link Layer Discovery Protocol (LLDP) allows two different
devices to collect hardware and protocol information about
neighboring devices, which is useful in troubleshooting the
network.
Step 3 Click Apply.
5.14.2.2 802.1x
The Device needs to pass 802.1x certification to enter the LAN.
Procedure
Step 1 Select Main Menu > SECURITY > System Service > 802.1x.
To Next Page
Loading...
Need help?
General
