Dahua N82B3P User Manual

User's Manual
324
Figure 5-283 Default
Step 2 Restore the settings.
●
Default: Restore all the configurations except network settings and user
management to the default..
●
Factory Default: Restore all the configurations to the factory default settings.
5.19.4.3.2 Resetting Device through the Reset Button
Background Information
You can use the reset button on the mainboard to reset the Device to the factory default
settings.
The reset button is available on select models.
After resetting, all the configurations will be lost.
Procedure
Step 1 Disconnect the Device from power source, and then remove the cover panel. For
details about removing the cover panel, see "3.3 HDD Installation".
Step 2 Find the reset button on the mainboard, and then connect the Device to the power

Dahua N82B3P Specifications

General

Brand	Dahua
Model	N82B3P
Category	Network Hardware
Language	English