User's Manual
154
Figure 5-122 Schedule and alarm linkage
1) Click .
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click Apply.
Step 7 Select Enable checkbox and then click Apply.
5.9.6.2.6 Crowd Gathering
Background Information
The system generates an alarm once people are gathering in the specified zone longer than
the defined duration.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > IVS.
To Next Page
Loading...
Need help?
General
