User's Manual
245
Figure 5-202 P2P
Step 2 Enable the P2P function.
After you enable the P2P function and connect to the Internet, the system will
collect the information such as email address and MAC address for remote access.
Step 3 Click Apply.
The P2P function is enabled. You can use your phone to scan the QR code under
Mobile Client to download and install the mobile client. After that, you can use the
mobile client to scan the QR code under Device SN to add the Device for remote
management. For details on the app operation, see the user's manual of the app.
5.12 Storage
You can manage the storage resources (such as record file) and storage space. So that it is
easy for you to use and enhance storage space usage.
5.12.1 Basic
Background Information
You can set basic storage parameters.
To Next Page
Loading...
Need help?
General
