Dahua N82B3P User Manual

User's Manual
183
Step 4 Click General (default), Blocklist or Allowlist tab.
Before enabling the blocklist alarm or allowlist alarm, you need to add the
corresponding plate information.
●
General: The system triggers an alarm when it detects any plate number.
●
Block List: The system triggers an alarm when it detects plate number on the
blocklist.
●
Allow List: The system triggers an alarm when it detects plate number on the
allowlist.
Step 5 Click Setting next to Schedule to configure the arming period.
The system triggers corresponding alarm actions only during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
Step 6 Configure alarm linkage actions. For details, see Step7.
Step 7 Click Apply.
5.9.9.3 Analytics+ Search (ANPR)
You can search for the ANPR detection results. For details, see "5.9.8.3.2 Motor Vehicle
Detection".
5.9.10 Crowd Distribution
The system detects the crowd distribution. When the crowd density exceeds the defined
threshold, an alarm is triggered.
5.9.10.1 Enabling Smart Plan
To use Analytics+ by camera, you need to enable the smart plan first. For details, see "5.9.2
Smart Plan".
5.9.10.2 Configuring Crowd Distribution
Configure the alarm rules of crowd distribution detection.
Prerequisites
Make sure that the connected camera supports the crowd distribution function.
Background Information
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > Crowd Distribution.

Dahua N82B3P Specifications

General

Brand	Dahua
Model	N82B3P
Category	Network Hardware
Language	English