User's Manual
92
Figure 5-59 Privacy masking
Step 2 Select a channel.
Step 3 Click to enable privacy masking.
Step 4 Click Add, select the masking type and color, and then draw mosaic or color blocks
in the image as needed.
A masking block appears on the video image.
●
The number of masking blocks that you can add might differ depending on the
camera. You can add up to 24 masking blocks.
●
Click Clear to delete all masking areas. Click to delete a masking area.
Step 5 Drag the masking block to a desired position and then configure the type, color and
other parameters.
Step 6 Click Apply.
5.7.6 Configuring Encoding Settings
You can set video bit stream and image parameters.
5.7.6.1 Configuring Audio and Video Encoding Settings
Background Information
You can set audio and video encoding parameters such as bit stream type, compression, and
resolution.
Procedure
Step 1 Select Main Menu > CAMERA > Encode > Audio/Video.
To Next Page
Loading...
Need help?
General
