Click to select a channel to record.
Enter the privacy contents.
Select a protocol. Different machines correspond to different
protocols.
Select the connection protocol type. Click , the IP Address window
is displayed.
In the Source IP box, enter the IP address (the machine that is
connected to the Device) that sends messages.
Select a character encoding mode.
In the Overlay Mode list, Select Turn or ROLL.
●
Turn: Once the information is at 16 lines, system displays the next
page.
●
ROLL: Once the information is at 16 lines, system rolls one line
after another to delete the first line.
When the local preview mode is in 4-split, the turn/ROLL function is
based on 8 lines.
When the network is not working correctly and cannot be recovered
after the entered timeout limit, the POS information will not display
normally. After the network is recovered, the latest POS information
will be displayed.
Enter the time that how long you want to keep the POS information
displaying. For example, enter 5, the POS information disappear from
the screen after 5 seconds.
Select Small, Medium, or Big as the text size of POS information
In the color bar, click to select the color for the text size of POS
information.
Enable the POS Info function, the POS information displays in the live
view/WEB.
There is no line delimiter by default.
After you set the line delimiter (HEX), the overlay information after
the delimiter is displayed in the new line. For example, the line
delimiter is F and the overlay information is 123F6789, NVR displays
overlay information on the local preview interface and Web as:
123
6789
To Next Page
Loading...
Need help?
General
