Dahua N82B3P User Manual

User's Manual
77
●
When you connect a camera to the NVR via PoE port, NVR automatically initializes the
camera. The camera adopts NVR current password and email information by default.
●
When you connect a camera to the NVR via PoE port after NVR is upgraded to the new
version, the NVR might fail to initialize the camera. You need to initialize the camera
manually.
Procedure
Step 1 Log in to the local system of the Device.
Step 2 Right-click the live page and then select Main Menu > CAMERA > Camera List >
Camera List.
Step 3 Click Uninitialized, and then click Search Device.
The Device displays cameras to be initialized.
Step 4 Select a camera to be initialized and then click Initialize.
Figure 5-50 Enter password
Step 5 Set password and email information for the remote device.
If you select Using current device password and email info, the remote device
automatically uses NVR admin account information (login password and email).
You can skip this step.
1) Cancel the selection of Using current device password and email info.

Dahua N82B3P Specifications

General

Brand	Dahua
Model	N82B3P
Category	Network Hardware
Language	English