Datalogic QuickScan I QD2400 User Manual

Enter/Exit Programming Mode
180 QuickScan™ I QD24XX
China Sensible Code Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Control. Length 1 is the minimum label
length if in Variable Length Mode, or the first fixed length if in Fixed
Length Mode. Characters can be set from
0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See page 217 for detailed instructions on setting this feature.
$CCSL1
Select China Sensible Code Length 1 Setting
To configure this feature, scan
the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at
left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar c
ode again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character

Datalogic QuickScan I QD2400 Specifications

General

Brand	Datalogic
Model	QuickScan I QD2400
Category	Barcode Reader
Language	English