Datalogic QuickScan I QD2400 User Manual

Enter/Exit Programming Mode
78 QuickScan™ I QD24XX
Partial Label Reading Control
Enable/Disable to ignore partial labels to be read within the boundary of the field of view.
IPPL00
Partial Label Reading Control = Disable
IPPL01
Partial Label Reading Control = Enable
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies. When this feature is enabled, you will be
unable to read normally-printed labels or programming labels in this manual. Scan the “Disable” bar code below to
return the scanner to its default for this feature. To set decoding for only 2D codes, go to "2D Normal/Inverse
S
ymbol Control" on page 175. For additional options, see the Aladdin configuration application.
CAUTION
$P,CIPVR00,P(CR)
Decode Negative Image = Disable
DEFAULT
$P,CIPVR01,P(CR)
Decode Negative Image = Enable
When this feature is enabled, you will be unable to read other programming labels in this manual.
Unlike some programming features and options, Deco
de Negative Image selections require that
you scan only one programming bar code label. DO NOT scan an ENTER/EXIT bar code prior to
scanning a Decode Negative Image bar code.
Image Capture
For information and a list of options for Image Capture, use the Datalogic Aladdin configuration application,
available for free download from the Datalogic Scanning website. NOTE: This feature is not supported by the
QD24XX model.

Datalogic QuickScan I QD2400 Specifications

General

Brand	Datalogic
Model	QuickScan I QD2400
Category	Barcode Reader
Language	English