Product Reference Guide 24
RS-232/USB-COM INTERFACES
INTERCHARACTER DELAY on page 25
BEEP ON ASCII BEL on page 25
BEEP ON NOT ON FILE on page 26
ACK NAK OPTIONS on page 27
ACK CHARACTER on page 28
NAK CHARACTER on page 28
ACK NAK TIMEOUT VALUE on page 29
ACK NAK RETRY COUNT on page 29
ACK NAK ERROR HANDLING on page 30
INDICATE TRANSMISSION FAILURE on page 30
DISABLE CHARACTER on page 31
ENABLE CHARACTER on page 31
The programming bar codes in this chapter allow modifications to the
standard RS-232 and USB-Com interfaces.
Reference Appendix B, Standard Defaults for a listing of standard factory settings.
To Next Page
Loading...
Need help?
General
