Dell(config-as-path)#deny 32$
Dell(config-as-path)#ex
Dell(conf)#router bgp 99
Dell(conf-router_bgp)#neighbor AAA filter-list Eagle in
Dell(conf-router_bgp)#show conf
!
router bgp 99
neighbor AAA peer-group
neighbor AAA filter-list Eaglein
neighbor AAA no shutdown
neighbor 10.155.15.2 remote-as 32
neighbor 10.155.15.2 filter-list 1 in
neighbor 10.155.15.2 shutdown
Dell(conf-router_bgp)#ex
Dell(conf)#ex
Dell#show ip as-path-access-lists
ip as-path access-list Eagle
deny 32$
Dell#
Redistributing Routes
In addition to ltering routes, you can add routes from other routing instances or protocols to the BGP process. With the redistribute
command, you can include ISIS, OSPF, static, or directly connected routes in the BGP process.
To add routes from other routing instances or protocols, use any of the following commands in ROUTER BGP mode.
• Include, directly connected or user-congured (static) routes in BGP.
ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode
redistribute {connected | static} [route-map map-name]
Congure the map-name parameter to specify the name of a congured route map.
• Include specic ISIS routes in BGP.
ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode
redistribute isis [level-1 | level-1-2 | level-2] [metric value] [route-map map-name]
Congure the following parameters:
• level-1, level-1-2, or level-2: Assign all redistributed routes to a level. The default is level-2.
• metric value: The value is from 0 to 16777215. The default is 0.
• map-name: name of a congured route map.
• Include specic OSPF routes in IS-IS.
ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode
redistribute ospf process-id [match external {1 | 2} | match internal] [metric-type {external
| internal}] [route-map map-name]
Congure the following parameters:
• process-id: the range is from 1 to 65535.
• match external: the range is from 1 or 2.
• match internal
• metric-type: external or internal.
• map-name: name of a congured route map.
198
Border Gateway Protocol IPv4 (BGPv4)
To Next Page
Loading...
Need help?
General
