MAINTENANCE
EPT024619 Issue 1 June 2016 5-7
Automatic Nozzle Purge
To prevent ink from drying in the print head nozzles during periods of
inactivity; the printer can be set to automatically purge the nozzles at
regular intervals.
Set up Automatic Nozzle Purge using the Wireless USB Keyboard
To set up an automatic nozzle purge using the wireless USB keyboard:
(1) From the main menu, highlight Settings.
(2) Press the Enter button.
(3) Highlight Purge.
(4) Press the Enter button.
(5) Highlight Status.
(6) Press the Enter button.
(7) Highlight Enable.
(8) Press the Enter button.
(9) Highlight Time.
(10) Enter a suitable time value (the time between nozzle purges).
(11) Press the Enter button.
(12) Press ESC to return to the main menu.
Set up Automatic Nozzle Purge using the PC
To set up an automatic nozzle purge using the PC:
(1) Open the Domino G20i software.
(2) Open the Printer Control menu.
(3) In the Print-Head sub menu, change the Purge Status to On.
(4) Change the Purge Time (the time between nozzle purges) to a
suitable value.
Set up Automatic Nozzle Purge using an Android device
To set up an automatic nozzle purge using an Android device:
(1) Open the Domino Printer G20i application on the Android device.
(2) Select printer settings.
(3) Select purge.
(4) Tick the Enable Purge tick box.
(5) Enter a suitable Delay time (Seconds) (the time between nozzle
purges) value.
(6) Return to the application’s home screen.
To Next Page
Loading...
Need help?
General
