OPERATION
3-46 EPT024619 Issue 1 June 2016
Creating a Message Using an Android Device
To create a message using an Android device:
(1) Open the Domino G20i application on the Android device.
(2) Select messages.
Static Text
All 128 ASCII characters can be entered into the message as static text. To
insert Chinese or other special character types using an Android device, a
texting logo must be used. See “Texting Logo (Chinese and Special
Character Text)” on page 3-47.
To insert static text into the message design:
(1) Press Select font type.
(2) Select either Normal font or UPPERCASE FONT.
(3) Select Select font size.
(4) Select a font size:
Note: A Smaller font enables more lines of text to be included in the
message.
(5) Select the line where the text should appear in the message.
(6) Use the on screen keyboard to enter the static text.
Font 1 line (12.7 mm)
Font 2 lines (5.93 mm)
Font 3 lines (3.89 mm)
Font 4 lines (2.54 mm)
Font 6 lines (1.69 mm)
To Next Page
Loading...
Need help?
General
