Domino G20I User Manual

INSTALLATION
EPT024619 Issue 1 June 2016 6-29
SHAFT ENCODER SET-UP
To use a shaft encoder, it must be set-up in the G20i’s settings.
Using the Wireless USB Keyboard
To set-up the shaft encoder using the wireless USB keyboard:
(1) From the main menu, highlight Settings.
(2) Press the Enter button.
(3) Move the cursor to highlight Speed.
(4) Press the Enter button.
(5) Move the cursor to highlight Select.
(6) Press the Enter button.
(7) Move the cursor to highlight Encoder.
(8) Press the Enter button.
(9) Move the cursor to highlight Value.
(10) Press the Enter button.
(11) Move the cursor to highlight Real.
(12) Press the Enter button.
Using a PC
To set-up the shaft encoder using a PC:
(1) Open the Domino G20i software.
(2) Open the Printer Control menu.
(3) Change the Encoder setting to On.

Domino G20I Specifications

General

Brand	Domino
Model	G20I
Category	Printer
Language	English