INSTALLATION
EPT024619 Issue 1 June 2016 6-19
Manual Driver Installation
To manually install the G20i driver:
(1) Select the Windows start icon on the PC.
(2) Right-click Computer and select Manage.
(3) Select Device Manager in the left side bar.
(4) Right-click on Thermal Inkjet Coder and select Update Driver
Software.
(5) Select Browse my computer for driver software.
(6) Select the driver software location.
(7) Select Next.
(8) Follow the on screen instructions to install the driver.
To Next Page
Loading...
Need help?
General
