OPERATION
3-16 EPT024619 Issue 1 June 2016
Using a PC
WARNING: Eye protection must be worn.
Note: When using a PC, messages will be saved locally on the PC’s
hard drive. If the G20i is disconnected from the PC, the
message will no longer be available to the G20i for printing.
To load and print a message using a PC:
(1) Open the Domino G20i software.
(2) Open the Designing menu.
(3) Click on the Open icon.
(4) Navigate to the location of the saved message file and select it.
(5) Click on Open.
(6) A window will open to inform you if the message has been
successfully opened, click OK to continue.
(7) Open the Printer Control menu.
(8) Click on the Print icon to begin printing the message.
To Next Page
Loading...
Need help?
General
